翻訳と辞書
Words near each other
・ Slit drum
・ Slit drum (Vanuatu)
・ Slit lamp
・ Slit sensilla
・ Slip on Through
・ Slip Point Light
・ Slip ratio
・ Slip ratio (gas–liquid flow)
・ Slip ring
・ Slip Run (West Branch Fishing Creek)
・ Slip sheet
・ Slip Slidin' Away
・ Slip Stitch and Pass
・ Slip Stream (G.I. Joe)
・ Slip Watkins
Slip-critical joint
・ Slip-cueing
・ Slip-n-Slide Records
・ Slip-off slope
・ Slip-on shoe
・ Slip-Slop-Slap
・ Slip-stitch knitting
・ Slip-turn
・ Slipback
・ Slipcase
・ Slipcasting
・ Slipcover
・ Slipcover (architecture)
・ Slipcover (disambiguation)
・ Slipdown Mountain


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Slip-critical joint : ウィキペディア英語版
Slip-critical joint

Slip-critical joint, from structural engineering, is a type of bolted structural steel connection which relies on friction between the two connected elements rather than bolt shear or bolt bearing to join two structural elements.
Shear (and tension) loads can be transferred between two structural elements by either a bearing-type connection or a slip-critical connection.
In a slip-critical connection, loads are transferred from one element to another through friction forces developed between the faying surfaces of the connection. These friction forces are generated by the extreme tightness of the structural bolts holding the connection together. These bolts, usually tension control bolts or compressible washer tension indicating type bolts, are tensioned to a minimum required amount to generate large enough friction forces between the faying surfaces such that the shear (or tension) load is transferred by the structural members and not by the bolts(in shear) and the connection plates(in bearing). The "turn of the nut" method is also widely used to achieve that state of friction.
If slip-critical connections fail (by slipping), they revert to bearing-type connections, with structural forces now transferred through bolt shear and connection plate bearing. Thus a slippage failure of a slip-critical connection is not necessarily a catastrophic failure. However, slippage of a slip-critical connection in a columns may lead to column instability. Slippage of a slip critical joint in a roof truss could result in unintended ponding effects.
The faying surfaces of slip-critical connections must be properly prepared in order to maximize friction forces between the surfaces joined. Usually this requires cleaning, descaling, roughening, and/or blasting of the faying surfaces. Painting the faying surfaces with a class B primer also allows to be in accordance with most of the design that ask for ''Slip-critical joint''.


抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Slip-critical joint」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.